Detailed Product Description

Name:scaffolding systerm

Surface:Paint,Galvanization,Hot-dip Galvanization

Deacription:

1219*914mm,1219*1219mm,1219*1700mm,1219*1930mm,914*1700mm,762*1700mm

1.       Jack base  

It is a base seat for adjusting and fixing the required scaffolding length above the wooden

2.       Main frame  

Insert the main frame into jack base section in per pendicular position.

3.       Cross brace  

For fixing the main frame in each span of scaffolding.

4.       Joint pin  

Insert into the top of main frame for joining the required dimension.

5.       Horizontal frame or catwalk  

It is a lateral pipe frames used for fixing the main frame to complete the first floor scaffolding.(It can be erected with about 2 to 4 spans in each high rising floor alternately.)

6.       Wall tie (keeper joint)

Use wall tie to prevent the frames from swaying down due to strong wind and unstable ground.Fasten the ties to walls every four (4) span horizontally and every four (4) frame,vertically.